Surtron LED SURTRON 400 HP can be used for simultaneous monopolar and bipolar surgery in applications requiring high precision and reliability. UNDERWATER CUTTING AND COAGULATION DUAL ACTIVITY - Two output channels for monopolar cutting - Two independent setting and output channels for more frequent monopolar coagulation. CONTROLLED CUTTING PROCEDURES - Cutting currents for an eschar-free incision - Cutting current with selectable coagulant property for bleeding-controlled dissection - Low capacitive coupling by current endoscopic procedures Slow BLEND DOUBLE SUBSIDIARY COAGULATION PROCEDURES - SPEEDY Coag DEEP ** * and two operators - SPRAY COAG can be performed using a handpiece or foot pedal WIDE BIPOLAR CHARACTERISTICS - Bipolar cut with bleeding control - Slow BLEND cutting current - Automatic start and stop activated separately TOTAL SAFETY FOR PATIENT AND SURGEON - The acceptability of the contact impedance between the patient's body and the neutral plate is constantly checked by the SPEC electronic skin plate control. - Continuous monitoring of leakage current - Automatically compensated mains voltage change before RF power start-up CUSTOMISED PROCEDURES - Independent choice of coagulation currents and power levels for each of the two operators - Ten personal procedures that can be configured and immediately recalled CONTROL OF EXTENSIONS AND CONNECTION OF SIGNALS - outputs for connection of controlled argon plasma units and smoke extractor AUTOMATIC SELF-DIAGNOSIS WITH SURTRON 400 HP - Automatic check of the functionality of the complete electronic drive and connected accessories and coded report of detected faults. * Coag SPEEDY is also known as Fulgurate or Forcé. ** Coag DEEP is also known as Pin Point, Dessicate or Soft. SPECIFICATIONS Code 10400.902 Maximum monopolar pure CUT output power: 400 W - 300 Ω Maximum monopolar cut-coag CUT80% output power: 300 W - 300 Ω Max. monopole cut-coag output power CUT60%: 250 W - 300 Ω Maximum monopole output power CUT40%: 200 W - 300 Ω Maximum monopole cut-coag output power ENHANCED: 250 W - 500 Ω Maximum monopole output power coag cut BLEND: 250 W - 300 Ω SPEEDY coag monopolar maximum output power: 120 W - 500 Ω Maximum power output of monopolar coagulator DEEP: 120 W - 200 Ω Maximum output power of SPRAY monopolar coagulator: 120 W - 2000 Ω Maximum output power of SPRAY ARGON monopolar coagulator: 120 W - 2000 Ω Maximum bipolar CUT output power: 120 W - 50 Ω Maximum bipolar cut-coag CUT80% output power: 120 W - 50 Ω Maximum bipolar cut-coag CUT60% output power: 120 W - 50 Ω Maximum bipolar cut-coag output power CUT40%: 100 W - 50 Ω Maximum bipolar cut-coag output power BLEND: 120 W - 150 Ω Maximum output power bipolar coag COAG: 120 W - 50 Ω Tank sealing: 200 W - 50 Ω Working frequency Monopolar / Bipolar: 425 kHz / 525 kHz Patient circuit: F Selectable input voltage: 115 - 230 Vac Mains frequency: 50 - 60 Hz Electrical input power: 1000 VA Dimensions WxHxD: 470x150x400 mm Weight: 17.5 kg CONTROLS Patient/plate circuit control Output power control Self-check control H.F. leakage current control Mains fluctuation compensationSECURITY EN60601-1 EN60601-1-2 EN60601-2-2 Enclosure protection level: IP21 Electrical classification: CF MDR 2017/745/EU Class: II b Complies with safety standards: EN 60601-1, EN 60601-1-2; EN 60601-2-2. Electrical classification: I CF. Technical data Réf. IBSUR100